Batching system
Salient features of the system :
In comparison to our SRCU 100 the conventional systems which are either Mechanical or Electro-mechanical has certain disadvantages
To mention a few:
Note: An existing Mechanical or Electromechanical Batch weighing system in the factory can be converted with our Conversion Kit and same results derived but at a very low cost.
- Large current weight display on computer monitor.
- Remote control facility.
- Auto zero facility
- Mechanical fault detector with alarm & display.
- L.E.D. Indicator on the control unit regarding Power Status, Lower & Upper Hopper Door functioning status & Error location indication facility.
- Data store facility.
- Report printing.
- Auto calibration of Weigh Hopper.
- No levers, knife edges involved so no Wear and Tear resulting low maintenance cost and down time.
- Digital Locking system to make the data Tamper proof.
- Rate of discharge 1800 kg. per hour with an accuracy of +/-15 gm per weigh Batch or release.
To mention a few:
- 1.Poor accuracy of the system.
- 2.Poor discharge rate or flow rate.
- 3.Frequent breakdown.
- 4.The Mechanical counter at times may miss a count, which is not possible to detect, resulting wrong computation.
- 5.Tea In Flight between upper & lower hopper goes unaccounted, resulting further inaccuracy and wrong computation of made Tea. The "SRCU 100"system eliminates all these above-mentioned disadvantages using digital technology and software driven control technology.