[ad_1]
If you are looking to measure and monitor weight or force, interfacing a load cell with an Arduino can be a great way to achieve accurate results. In this step-by-step guide, we will show you how to easily interface a load cell with an Arduino for your electronics projects.
Step 1: Gather your materials
To begin, you will need the following materials:
– Arduino board (such as Arduino Uno or Arduino Mega)
– Load cell (make sure it is compatible with your Arduino board)
– HX711 Load Cell Amplifier module
– Jumper wires
– Breadboard
– USB cable for Arduino
– Power source for the load cell
Step 2: Connect the Load Cell to the HX711 Amplifier
The first step is to connect the load cell to the HX711 Amplifier module. The load cell should have four wires – red, black, white, and green. Connect the red wire to E+ on the HX711 module, the black wire to E-, the white wire to A-, and the green wire to A+.
Step 3: Connect the HX711 Amplifier to the Arduino
Next, connect the HX711 Amplifier module to the Arduino board. Connect the VCC pin on the HX711 to the 5V pin on the Arduino, GND to GND, DT to digital pin 2, and SCK to digital pin 3.
Step 4: Install the HX711 Library
Before you can start interfacing the load cell with the Arduino, you will need to install the HX711 Library. You can do this by opening the Arduino IDE, going to Sketch -> Include Library -> Manage Libraries, and then searching for “HX711.” Install the library and then restart the Arduino IDE.
Step 5: Upload the Code
Now, it’s time to upload the code to the Arduino. Copy and paste the following code into the Arduino IDE:
#include “HX711.h”
#define DOUT 3
#define CLK 2
HX711 scale;
void setup() {
Serial.begin(9600);
scale.begin(DOUT, CLK);
}
void loop() {
Serial.println(scale.get_units(10), 1);
}
Upload the code to your Arduino board by clicking the upload button in the IDE.
Step 6: Test the Load Cell
Once the code has been uploaded successfully, open the serial monitor in the Arduino IDE. You should see the weight or force measurements displayed in the serial monitor. Test the load cell by placing objects of known weight on it and compare the results with the actual weights.
And there you have it – a simple step-by-step guide on how to interface a load cell with an Arduino. With this setup, you can now use the load cell for various applications such as weighing scales, force sensing, and more. Happy tinkering!
https://maps.app.goo.gl/jgBjMS3mZYiTGFWx9