[ad_1]
Are you looking to create a precise weight measurement system using a load cell, HX711 amplifier, and Arduino? If so, you’ve come to the right place. In this article, we will discuss how to interface a load cell with an HX711 amplifier and Arduino to achieve accurate and reliable weight readings.
Load cells are transducers that convert force or weight into an electrical signal. They are commonly used in industrial, commercial, and research settings for measuring weight with high precision. The HX711 amplifier is specifically designed to interface with load cells, providing a stable and accurate signal for processing by a microcontroller like Arduino.
To get started, you will need the following components:
1. Load cell
2. HX711 amplifier module
3. Arduino board
4. Breadboard and jumper wires
5. Soldering iron and solder (optional)
First, connect the load cell to the HX711 module. The load cell will typically have four colored wires – red, black, green, and white. Connect the red and black wires to the E+ and E- pins on the HX711 module, respectively. Then, connect the green and white wires to the A+ and A- pins on the HX711 module, respectively.
Next, connect the output pins of the HX711 module to the Arduino. The HX711 module will have four pins – VCC, GND, DT, and SCK. Connect the VCC and GND pins to the 5V and GND pins on the Arduino, respectively. Then, connect the DT pin to a digital input pin on the Arduino (e.g. D2) and the SCK pin to another digital input pin on the Arduino (e.g. D3).
Now, it’s time to write the code for the Arduino. You can use the HX711 library, which provides functions for reading the weight data from the HX711 module. Here is a simple example code to get you started:
#include
#define DOUT 2
#define SCK 3
HX711 scale(DOUT, SCK);
void setup() {
Serial.begin(9600);
scale.set_scale();
scale.tare();
}
void loop() {
float weight = scale.get_units();
Serial.print(“Weight: “);
Serial.println(weight);
delay(1000);
}
Upload the code to the Arduino board and open the Serial Monitor to see the weight readings. You can calibrate the system by placing known weights on the load cell and adjusting the scale factor in the code accordingly.
In conclusion, interfacing a load cell with an HX711 amplifier and Arduino is a straightforward process that can be completed with basic electronic components and coding skills. By following the steps outlined in this article, you can create a reliable and precise weight measurement system for your projects or applications. Sharpen your electronics skills in Pune by exploring and experimenting with this technology.
https://maps.app.goo.gl/jgBjMS3mZYiTGFWx9